Download Samsung J4 Firmware (Stock Rom)

Samsung J4 Firmware Download:-

DOWNLOAD SAMSUNG J4 FIRMWARE

 

In this Article, I will provide the Samsung J4 Firmware so you can easily unbrick your Samsung J4 Device. Download Samsung J4 Firmware with fast links so you don’t have to wait for downloading the Samsung J4 Firmware.

About Samsung J4:-

download samsung J4 firmware

 

  • Samsung Galaxy J4 smartphone was launched in May 2018. The phone comes with a 5.50-inch touchscreen display with a resolution of 720×1280 pixels and an aspect ratio of 16:9. Samsung Galaxy J4 is powered by a 1.4GHz quad-core Exynos 7570 processor. It comes with 2GB of RAM. The Samsung Galaxy J4 runs Android 8.0 and is powered by a 3,000mAh removable battery.
  • As far as the cameras are concerned, the Samsung Galaxy J4 on the rear packs a 13-megapixel camera with an f/1.9 aperture. The rear camera setup has autofocus. It sports a 5-megapixel camera on the front for selfies, with an f/2.2 aperture.
  • Samsung Galaxy J4 based on Android 8.0 and packs 16GB of inbuilt storage that can be expanded via microSD card (up to 256GB). The Samsung Galaxy J4 is a dual-SIM (GSM and GSM) smartphone that accepts Micro-SIM and Micro-SIM cards.

 

How to Download Samsung J4 firmware:-

  1. First of all Download Samsung J4 Firmware.
  2. After Visiting the link you will have to click on Download.

How to Unbrick or Install Samsung J4 Firmware:-

  1. Download the Samsung J4 Firmware from the Above Link.
  2. After Downloading unzip the Firmware File on your pc.
  3. Now Download Odin.
  4. Now Boot your Phone into Download Mode.
  5. Open Odin and Load the Firmware Files.
  6. Now Click on Flash Button and wait for 5 to 10 minutes.
  7. Hurray! You have Successfully Installed the Firmware on your Samsung M20

Leave a Comment